Author: FENG Jiahao |
A recent study titled Vision-based high-precision calibration of internal relative pose errors in large-aperture monolithic multi-mirror has been published in Measurement. The work was carried out by researchers from the State Key Laboratory of Advanced Manufacturing for Optical Systems at the Changchun Institute of Optics, Fine Mechanics and Physics of the Chinese Academy of Sciences.
The team developed a calibration method that combines machine vision with interferometry to separate a mirror’s fixed internal offset from alignment changes in the test path. Applied to a four-metre-class monolithic mirror, the method achieved a combined standard uncertainty of 31 micrometres.
Large optical systems increasingly use monolithic mirrors that integrate several reflecting surfaces into one component. When the primary and tertiary surfaces are manufactured on the same substrate, their relative position is fixed during fabrication. A lateral displacement between their optical axes cannot be corrected later by adjusting separate mounts and can reduce imaging performance.
It therefore needs to be measured during polishing and final inspection, while the result can still guide the manufacturing process. Because the two surfaces share one structure, the error belongs to the mirror itself rather than to an adjustable assembly. A dependable value helps engineers assess polishing progress and determine whether further correction is required before the mirror is completed.
The central challenge is that interferometric testing responds to two different sources of error. One is the intrinsic offset between the mirror surfaces. The other is a temporary lateral shift in the test beam when the interferometer is aligned with the mirror. Both can produce similar coma in the measured wavefront, so optical data alone cannot reliably distinguish them. Conventional approaches may also transfer measurement references through several mechanical stages, allowing small alignment errors to accumulate. Repeated realignment can also make results from different manufacturing stages harder to compare.
To create an independent geometric reference, the researchers arranged four industrial cameras around the mirror along two orthogonal directions. The cameras observed the relationship between a crosshair projected by the interferometer and reference features on the mirror. Images recorded under two illumination conditions isolated the features and mapped them onto a common measurement plane. The synchronized observations were then combined through a rigid-body model to separate lateral translation from rotation. Calibration and compensation procedures corrected the influence of the reference plate and camera mounting geometry.
The vision system provided a direct estimate of lateral movement in the test path. The team then established how that movement changes the coma term measured by the interferometer. Removing the test-path contribution from the wavefront data left an estimate of the intrinsic relative offset between the primary and tertiary surfaces. Tests at different alignment states verified the decoupling process. The method was also applied during a polishing cycle, showing that it can provide feedback while the mirror is still being manufactured.
The study shows how machine vision can complement interferometry when different geometric errors produce similar optical signals. By adding an independent measurement of test-path motion, the approach can support fabrication feedback, process control and final evaluation of large monolithic mirrors. The current implementation measures lateral decenter in a two-dimensional plane rather than every component of relative pose. The researchers note that future work could extend the method through three-dimensional vision measurement.
LI Longxiang
Changchun Institute of Optics, Fine Mechanics and Physics
E-mail: lilx@ciomp.ac.cn