中文 |

Detector Multiplexing Expands Infrared Coverage with a Small Array

Author: FENG Jiahao |

A recent study titled Detector-multiplexed infrared sparse point-target imaging via field-dependent PSF encoding has been published in Optics and Laser Technology. The work was carried out by researchers at the Changchun Institute of Optics, Fine Mechanics and Physics of the Chinese Academy of Sciences. The team developed an optical system that folds light from several sub-fields onto one small-format detector and uses field-dependent spot shapes to recover the field of origin of isolated infrared targets. In sequence-level tests, the method identified the correct field in about 89 percent of cases.

Wide-field infrared imaging commonly relies on large focal-plane arrays because each part of the scene must occupy a distinct detector region. Expanding the array increases the demands of detector fabrication, cooling, electronic readout and system integration. The researchers pursued another route by reusing the same detector area for several viewing regions. This approach allows the optical field to grow without increasing detector format in direct proportion, which may reduce the hardware burden of wide-field systems designed for sparse point-like targets. For scenes containing only a few isolated targets, much of a large array may carry no useful target signal at a given moment. The new design uses that sparsity by mapping several regions to shared detector pixels.

Detector reuse creates a new problem. Once several optical paths are folded onto the same area, targets from different directions can appear at overlapping detector coordinates. Position alone therefore cannot reveal where a target came from. The researchers encoded the missing field information in the point spread function, the small image formed by a point-like source. Its orientation, width and elongation change predictably with field position, providing a second set of cues in addition to detector coordinates.

To generate the field-dependent patterns, the optical system uses a reflective folding module and a cylindrical modulation element at an intermediate image plane. The folding module directs the central, upper, lower, left and right sub-fields onto a common detector footprint. The cylindrical element introduces controlled astigmatism and coma, so the spots change shape instead of remaining symmetric. A calibrated codebook records the characteristic spot patterns for each field. During decoding, the system compares the measured centroid, principal widths, aspect ratio and orientation with the reference patterns and assigns the target to the closest field class.

The team first designed the system in Zemax optical design software and then constructed a short-wave infrared laboratory prototype. Interchangeable cylindrical elements varied the strength of the optical encoding. The measured spot elongation changed with element curvature in the same overall trend predicted by simulation, confirming that the patterns could be controlled through the optical design. A separate evaluation used recorded target trajectories to test the field codebook. The classification errors were confined to transitional field classes, identifying the cases in which the present encoding remains most difficult to distinguish.

The work shows that controlled aberrations can carry field information while a small detector records multiple sub-fields. The method is intended for isolated or weakly overlapping point targets, not dense scenes in which many responses overlap continuously. Because field identity is recovered from spot morphology, calibration and foreground extraction directly affect the decoding result. Its practical limits also include alignment errors, fabrication tolerances, detector noise and the finite number of spot patterns that can be separated reliably. Further work is needed to test these effects and to increase the number of distinguishable sub-fields.


Contact

LIU Chunyu

Changchun Institute of Optics, Fine Mechanics and Physics

E-mail:

cas_logo.png



       Copyright @ 吉ICP备06002510号 2007 CIOMP130033